SPSolve ProductionPractical production help from Lancing UK
changeover time

How can I make cans changeovers faster?

Separate internal tasks that require a stopped machine from external preparation, standardise settings and prove the first good pack after changeover.

Recommended machinery for this problem
stockpack.co.uk
View suitable machinery at stockpack.co.uk →

Direct answer

Separate internal tasks that require a stopped machine from external preparation, standardise settings and prove the first good pack after changeover. For cans, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Tools, parts and materials are not prepared before stopping in the cans process.
  • Settings are not stored or referenced in the cans process.
  • Adjustments are repeated by trial and error in the cans process.
  • First-off approval is not defined in the cans process.

What should be checked first?

  • Video and time the current changeover
  • Separate internal from external tasks
  • Prepare labelled change parts and tools
  • Record repeatable mechanical and recipe settings
  • Use one standard sequence
  • Define the first-off checks
  • Confirm the first sustained good run

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

stockpack.co.ukView machinery →environmentalpackaging.co.ukView machinery →

Related cans questions

Production process relating to cansPackaging materials and formats

Why is cans production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to cansPackaging materials and formats

How can I increase cans production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to cansPackaging materials and formats

Why does cans equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for changeover time in cans?
Video and time the current changeover. Separate internal from external tasks.
Can settings alone solve changeover time?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a cans machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with stockpack.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.