SPSolve ProductionPractical production help from Lancing UK
compatibility

How do I check product and packaging compatibility for solvents?

Compatibility must be proven across product contact, storage, temperature, pressure, sealing, labelling, handling and the normal range of supplier variation.

Recommended machinery for this problem
liquidfillers.co.uk
View suitable machinery at liquidfillers.co.uk →

Direct answer

Compatibility must be proven across product contact, storage, temperature, pressure, sealing, labelling, handling and the normal range of supplier variation. For solvents, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Product attacks seals, hoses, liners or adhesives in the solvents process.
  • Temperature or storage changes pack performance in the solvents process.
  • The pack is dimensionally compatible but mechanically unstable in the solvents process.
  • Trials do not represent production variation in the solvents process.

What should be checked first?

  • Obtain current technical and safety data
  • List every product-contact material
  • Test minimum and maximum temperatures
  • Check sealing, torque, label and transport behaviour
  • Use more than one material batch
  • Run the actual production process
  • Document approved combinations and limits

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

liquidfillers.co.ukView machinery →fillingmachinesuk.co.ukView machinery →automaticfillingmachines.co.ukView machinery →

Related solvents questions

Production process relating to solventsLiquid filling

Why is solvents production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to solventsLiquid filling

How can I increase solvents production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to solventsLiquid filling

Why does solvents equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for compatibility in solvents?
Obtain current technical and safety data. List every product-contact material.
Can settings alone solve compatibility?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a solvents machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with liquidfillers.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.