SPSolve ProductionPractical production help from Lancing UK
automation

When should I automate case taping?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

Recommended machinery for this problem
casetapers.co.uk
View suitable machinery at casetapers.co.uk →

Direct answer

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably. For case taping, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • The manual process has not been measured in the case taping process.
  • Automation is aimed at a symptom rather than the constraint in the case taping process.
  • The product or pack range is still unstable in the case taping process.
  • Maintenance and changeover capability are not included in the case taping process.

What should be checked first?

  • Measure labour, output, rejects and waiting
  • Identify the limiting operation
  • Compare semi-automatic and automatic routes
  • Model normal product and format mix
  • Include replenishment and exception handling
  • Calculate total ownership cost
  • Plan phased acceptance and training

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

casetapers.co.ukView machinery →packagingmachinesuk.co.ukView machinery →automaticpackaginglines.co.ukView machinery →

Related case taping questions

Production process relating to case tapingSealing and end of line

Why is case taping production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to case tapingSealing and end of line

How can I increase case taping production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to case tapingSealing and end of line

Why does case taping equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for automation in case taping?
Measure labour, output, rejects and waiting. Identify the limiting operation.
Can settings alone solve automation?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a case taping machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with casetapers.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.