SPSolve ProductionPractical production help from Lancing UK
environment and utilities

How do temperature, humidity or utilities affect case packing?

Record the condition at the machine. Temperature, humidity, air quality, pressure, voltage and extraction can change product behaviour and equipment repeatability.

Recommended machinery for this problem
packagingmachinesuk.co.uk
View suitable machinery at packagingmachinesuk.co.uk →

Direct answer

Record the condition at the machine. Temperature, humidity, air quality, pressure, voltage and extraction can change product behaviour and equipment repeatability. For case packing, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Product condition changes with temperature or humidity in the case packing process.
  • Compressed air quality or pressure is unstable in the case packing process.
  • Voltage, extraction, water or drainage is insufficient in the case packing process.
  • The machine is tested in different conditions from production in the case packing process.

What should be checked first?

  • Record conditions during good and bad runs
  • Check utilities under peak load
  • Measure product temperature and humidity exposure
  • Inspect air quality and pressure drop
  • Verify extraction and drainage
  • Define operating limits
  • Repeat trials at worst normal conditions

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

packagingmachinesuk.co.ukView machinery →automaticpackaginglines.co.ukView machinery →

Related case packing questions

Production process relating to case packingSealing and end of line

Why is case packing production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to case packingSealing and end of line

How can I increase case packing production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to case packingSealing and end of line

Why does case packing equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for environment and utilities in case packing?
Record conditions during good and bad runs. Check utilities under peak load.
Can settings alone solve environment and utilities?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a case packing machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with packagingmachinesuk.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.