SPSolve ProductionPractical production help from Lancing UK
scaling production

How do I scale rotary tables from manual to automatic production?

Scale the dominant constraint first and retain enough flexibility for normal product, pack and demand variation.

Recommended machinery for this problem
packagingconveyors.co.uk
View suitable machinery at packagingconveyors.co.uk →

Direct answer

Scale the dominant constraint first and retain enough flexibility for normal product, pack and demand variation. For rotary tables, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Growth assumptions are not connected to measured demand in the rotary tables process.
  • A full line is chosen before the product range stabilises in the rotary tables process.
  • The next bottleneck is ignored in the rotary tables process.
  • Utilities and space cannot support the target in the rotary tables process.

What should be checked first?

  • Measure the current operation
  • Forecast low, expected and high demand
  • Identify the first capacity constraint
  • Compare manual, semi-automatic and automatic stages
  • Protect changeover flexibility
  • Plan utilities and layout
  • Set stage-gate acceptance criteria

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

packagingconveyors.co.ukView machinery →bowlfeeders.co.ukView machinery →bottleunscramblers.co.ukView machinery →

Related rotary tables questions

Production process relating to rotary tablesPreparation and feeding

Why is rotary tables production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to rotary tablesPreparation and feeding

How can I increase rotary tables production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to rotary tablesPreparation and feeding

Why does rotary tables equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for scaling production in rotary tables?
Measure the current operation. Forecast low, expected and high demand.
Can settings alone solve scaling production?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a rotary tables machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with packagingconveyors.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.